Showing posts with label Lady Mishka. Show all posts
Showing posts with label Lady Mishka. Show all posts
Arr Matey
-- CT Tutorial --
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
Supplies Needed
Tube/Image of choice –"Pirate" - Lady Mishka
You will need a license to use this tube
You can Purchase this tube at
-Lets Get Started-
Open a new blank canvas
600x600
Floodfill white.
Paste a paper of choice from the scrapkit
I used paper 2.
You can also
floodfill with a colour from your tube.
I chose a paper.
Layers - Load/Save Mask - Load Mask from disk -
Load your mask of choice - or use as i have
Mask - load with the following settings
Source Luminance - Fit to canvas - Hide all mask checked.
Merge Group.
Move to the bottom.
or another kit, or colour of choice.
I will assume you are using the same kit as I have.
I used paper 11
Selections - Invert - Hit delete on your keyboard.
not to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper to.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
600x600
Floodfill white.
Paste a paper of choice from the scrapkit
I used paper 2.
You can also
floodfill with a colour from your tube.
I chose a paper.
Layers - Load/Save Mask - Load Mask from disk -
Load your mask of choice - or use as i have
Mask - load with the following settings
Source Luminance - Fit to canvas - Hide all mask checked.
Merge Group.
Move to the bottom.
Copy and paste element 93 as a new layer
resize to suit.
With your magic wand
Select inside the frame
Selections - modify - Expand by 5
Copy and paste a paper of choice from the scrapkit.resize to suit.
With your magic wand
Select inside the frame
Selections - modify - Expand by 5
or another kit, or colour of choice.
I will assume you are using the same kit as I have.
I used paper 11
Selections - Invert - Hit delete on your keyboard.
Move this paper layer below your frame layer.
You can also use the above steps just colour if you prefernot to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper to.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Copy and paste your tube as a new layer
place as you wish or as i have,
See my finished Tag as a guide.
remembering to add drop shadow to each layer.0 - 0 - 30 - 6.00 - Black.
Copy and paste your tube as a new layer
place as you wish or as i have,
See my finished Tag as a guide.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
0 - 0 - 30 - 6.00 - Black.
Add any elements that you may wish
and rotate and place as you wish.
I used elements
92, 70, 38 and 36
Place as you wish are use my finished tag as a guide
and rotate and place as you wish.
I used elements
92, 70, 38 and 36
Place as you wish are use my finished tag as a guide
Add any other names and copy rite information that is required,
Save as you would normally.
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
Sunny Day Scrapkit Preview
Sunny Day Scrapkit Preview
Blood Night
**CT for Tammy Welt**
Here is a tag I made using
Tammy Welt - Blood Night PTU kit
you can find this kit in store
Also using the wonderful artwork of
(C)LadyMishka
You can also find more about Lady Mishka's Tubes
on her blog
Lady Mishka Art
(C)LadyMishka
You can also find more about Lady Mishka's Tubes
on her blog
Lady Mishka Art
EMOlution
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
- Supplies Needed -
Tube Of Choice - Lady Mishka - PicsForDesign
Tube Of Choice - Lady Mishka - PicsForDesign
Scrap Kit Of Choice - EMOlution - PTU Hania Designs
Open up the elements.
Font used - Simply Glamorous - Pixelette (Credits)
-----------------------------------------
- Lets Get Started -
Open up a blank canvas
600x650
Add a new raster layer and flood fill with white.
Move this layer to the bottom of your layers Palette.
Open up the elements.
Paste Element 105 as a new layer
Resize to a size you are happy with.
Once you are happy
With your magic wand select inside the frame,
selections - modify - Expand by 10.
Layers - new raster layer -
Layers - new raster layer -
Choose a colour of choice, floodfill this layer.
Once happy with placement
selections - invert - hit delete on your keyboard.
Move this layer below your frame layer.
Selections - Select all - float - defloat
selctions - modify - expand by 10
Copy and paste your tube as a new layer
once happy with placement
selections - Invert - delete.
Move this layer below your frame layer.
Over on the layers palette
change to luminance legacy.
Copy and Paste Element 100 as a new layer
Place to the right of your canvas.
Resize until you are happy.
I resized by 70%
I resized by 70%
Copy and Paste any other elements that you may wish
to use.
See my finished tag as a guide..
to use.
See my finished tag as a guide..
(Use my tag as a guide)
Add drop shadow to each layer
I used
2 - 3 - 30 - 6 - Black Hit load/OK
Add any other elements that you may wish to use.
Copy and Paste your tube as a new layer
Place as you wish on your canvas
Once happy apply the above drop shadow.
Add any other names and copy rite information that is required.
save as you would normally.
That's it tutorial complete.
You can use my tag as a reference.
This tutorial was written by DigiMania
any resemblance to any other tutorial is purely coincidental.
Just Beachy
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
- Supplies Needed -
Tube/Image of choice – LadyMishka - PicsForDesign
You will need a license to use this tube
Font used - KR California Sun - Pixelette (Credits)
-----------------------------------------
- Lets Get Started -
Open up a blank canvas
700 x 600
Add a new raster layer and flood fill with white.
Move this layer to the bottom of your layers Palette.
Copy and paste Element 141 (Clouds) as a new layer.
Re size to suit.
Copy and paste Frame 5 as a new layer
again re size to a size to suit.
Once happy with your magic wand, Select inside the frame
Selections - Modify - Expand by 10
Copy and paste paper 3 as a new layer
Move below your frame layer
once happy with placement,
Selections - Invert - Delete on your keyboard
Open Element 144 (Wave) re size till happy
Place on the bottom left of your frame
Duplicate - Image - Mirror
Open Element 118 paste as a new layer
duplicate x 3 and place at the bottom of your frame
Move these layers below your frame layer,
Open Element 21 resize by 30% and place bottom left of tag.
Open elements 15,16 and 17
Resize by 20% and place as a bundle on the right side
of your tag at the bottom.
Element 40 again re size to suit
paste as a new layer on the right side of your tag
Open element 100 resize and place at the side of your surf board
you just placed.
Copy and paste your tube of choice and place
as you wish or as I have.
See my tag as a guide.
Add a drop shadow of choice to each layer
I used Drop shadow with the following settings
2 - 3 - 30 - 6 - Black Hit load/OK
Add any other elements that you may wish to use.
Add any other names and copy rite information that is required.
save as you would normally.
That's it tutorial complete.
You can use my tag as a reference.
This tutorial was written by DigiMania
any resemblance to any other tutorial is purely coincidental.
Attitude Princess
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
- Supplies Needed -
Tube/Image of choice – Lady mishka - PicsForDesign
You will need a license to use this tube
Scrapkit - PTU - Attitde Princess - Kandii Popz
Font used – Frosting for breakfast & Pixelette (Credits)
-----------------------------------------
- Lets Get Started -
Open a new canvas
600 x 600
Flood fill with white
Open up the circle frame from the kit.
Duplicate this layer.
move to the right slightly higher.
see my tag as a guide.
Once happy merge these two layers together.
Open up the wire element
move this below your frame layer.
duplicate - image mirror -
move around this element until you are happy.
merge these two layers together.
with your magic wand select inside the frame layer.
selections - modify - expand by 5
copy and paste a paper of choice as anew layer.
selections - invert - hit delete on your keyboard.
Move this layer below your frame layer.
Again select inside the frame layer with your magic wand
copy and paste your tube as a new layer and place as you wish
to be seen on your frame layer. use my tag as a guide.
with your eraser tool delete any of the tube you do not want to see.
Open a bow of choice. Re size to suit.
Place at the top of your frame.
again revert to my tag as a guide.
duplicate this for the other frame.
Open a new canvas
600 x 600
Flood fill with white
Open up the circle frame from the kit.
Duplicate this layer.
move to the right slightly higher.
see my tag as a guide.
Once happy merge these two layers together.
Open up the wire element
move this below your frame layer.
duplicate - image mirror -
move around this element until you are happy.
merge these two layers together.
with your magic wand select inside the frame layer.
selections - modify - expand by 5
copy and paste a paper of choice as anew layer.
selections - invert - hit delete on your keyboard.
Move this layer below your frame layer.
Again select inside the frame layer with your magic wand
copy and paste your tube as a new layer and place as you wish
to be seen on your frame layer. use my tag as a guide.
with your eraser tool delete any of the tube you do not want to see.
Open a bow of choice. Re size to suit.
Place at the top of your frame.
again revert to my tag as a guide.
duplicate this for the other frame.
Add a drop shadow of choice to each layer.
I used the following
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Add any other elements that you may wish to use
to create the tag you want.
or See my tag as a guide to place the elements as I have.
Add any other names and copy rite information that is required,
Save as you would normally.
Thats it tutorial complete. Use my finished result as a reference.
This tutorial was written by DigiMania Scraps
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc
I 4 C U
Program
of choice is pspX2
This
tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
-
Supplies Needed -
Tube/Image
of choice – Lady Mishka - PicsForDesign
You
will need a license to use this tube
Scrapkit
of Choice
I
am using this Beautiful PTU Kit
Letters
From Heaven – Kizzed By Kellz
Template
of choice - Marilyns Creationz – Temp 3 - Creative Misfits
Font
used – Spac3 Halftone & Pixelette (Credits)
-----------------------------------------
-
Lets Get Started -
I
will assume you are using the
same
scrap kit as i am during this tutorial
however
this can be done using any other tutorial
with
adjustments
Open your template and close of the credits
CTRL+D Close the original template.
Select a section of your template and color to suit
or selections - select all - selections float - selections defloat -
Selections invert - paste a paper of choice - hit delete on your keyboard
I chose paper 4 from the above kit.
Repeat this step for the remaining sections you wish to color/paper
On the outer of the sections there is a white frame
I added noise to this.
I did this by going to adjust - add/remove noise - add noise and loaded
with these settings
Uniform - Monochrome - 26
Copy and Paste your tube as a new layer
place as you wish or as I have, See my tag as a guide.
Select the inner of the frame with your magic wand
click back on your tube layer - Selections - Invert - Hit delete on your keyboard.
I used several elements from this wonderful kit
I used the clouds moved these below the template also the twigs with hanging box
and moved this below the center frame.
I used several little flowers and resized to suit
I added a drop shadow to each layer on my canvas with the following settings.
Effects - 3d effects - drop shadow - 2 - 3- 40 - 5 - Black
Add
any other names and copy rite information that is required,
Save
as you would normally.
Thats
it tutorial complete. Use my finished result as a reference.
This
tutorial was written by DigiMania Scraps
Any
resemblance to any other tutorial is purely coincidental
All
tutorials are registered at Tutorial Writers Inc
This is the result by Luna on Facebook
Luna found my tutorial by my Facebook Tutorial Page.
I would love to see any creations made using my tutorials
Thanks again Luna :)
This is the result by Luna on Facebook
Luna found my tutorial by my Facebook Tutorial Page.
I would love to see any creations made using my tutorials
Thanks again Luna :)
Bitch Squad
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
- Supplies Needed -
Tube/Image of choice – Lady Mishka - PicsForDesign
You will need a license to use this tube
Scrap kit of choice - Bitch Squad - Foxy Designs
Font used – Poplar STD & Pixelette (Credits)
-----------------------------------------
- Lets Get Started -
I will assume that you have purchased the same scrap as i have.
However this tutorial can be done using another kit
with some adjustments.
Open up a blank canvas 600 x 600
flood fill with white
Open up a frame of choice
or as i have Element 24
place in the center of your canvas
with your magic wand, select inside your frame.
Selections - Select All - Float - Defloat -
Selections - Modify - Expand by 2
IF you are going to Floodfill with a colour of choice
you will need to add a new raster layer.
Or paste a paper of choice as i have.
I used paper 10
Selections - Invert - Hit delete on your keyboard.
Move this layer below your frame layer.
Again Select your frame layer
Selections - Select all - Float- De float - Selections - Modify - Expand by 2
Copy and Paste your tube of choice and place in the
frame as you wish your tube to appear, Use my tag as a guide.
Once happy with placement
Over on your layers palette change your blend mode to
Lighten and lower the opacity to 48.
Or you can mess about with the settings until you are happy.
Copy and Paste any elements that you may wish to use.
See my tag as a guide.
I used the following elements from the scrap kit
Elements 46, 40, 38, 36, 30 and 20
see my tag as a guide for placement.
You will need to resize these elements to a size to suit.
Once happy with placement add the following drop shadow
loading the following settings
0 - 0 - 30 - 6.00 - Black.
0 - 0 - 30 - 6.00 - Black.
Add any other names and copy rite information that is required,
Save as you would normally.
That's it tutorial complete. Use my finished result as a reference.
This tutorial was written by DigiMania Scraps
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc
Subscribe to:
Posts
(Atom)
Blinkie
