Attitude Princess
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
- Supplies Needed -
Tube/Image of choice – Lady mishka - PicsForDesign
You will need a license to use this tube
Scrapkit - PTU - Attitde Princess - Kandii Popz
Font used – Frosting for breakfast & Pixelette (Credits)
-----------------------------------------
- Lets Get Started -
Open a new canvas
600 x 600
Flood fill with white
Open up the circle frame from the kit.
Duplicate this layer.
move to the right slightly higher.
see my tag as a guide.
Once happy merge these two layers together.
Open up the wire element
move this below your frame layer.
duplicate - image mirror -
move around this element until you are happy.
merge these two layers together.
with your magic wand select inside the frame layer.
selections - modify - expand by 5
copy and paste a paper of choice as anew layer.
selections - invert - hit delete on your keyboard.
Move this layer below your frame layer.
Again select inside the frame layer with your magic wand
copy and paste your tube as a new layer and place as you wish
to be seen on your frame layer. use my tag as a guide.
with your eraser tool delete any of the tube you do not want to see.
Open a bow of choice. Re size to suit.
Place at the top of your frame.
again revert to my tag as a guide.
duplicate this for the other frame.
Open a new canvas
600 x 600
Flood fill with white
Open up the circle frame from the kit.
Duplicate this layer.
move to the right slightly higher.
see my tag as a guide.
Once happy merge these two layers together.
Open up the wire element
move this below your frame layer.
duplicate - image mirror -
move around this element until you are happy.
merge these two layers together.
with your magic wand select inside the frame layer.
selections - modify - expand by 5
copy and paste a paper of choice as anew layer.
selections - invert - hit delete on your keyboard.
Move this layer below your frame layer.
Again select inside the frame layer with your magic wand
copy and paste your tube as a new layer and place as you wish
to be seen on your frame layer. use my tag as a guide.
with your eraser tool delete any of the tube you do not want to see.
Open a bow of choice. Re size to suit.
Place at the top of your frame.
again revert to my tag as a guide.
duplicate this for the other frame.
Add a drop shadow of choice to each layer.
I used the following
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Add any other elements that you may wish to use
to create the tag you want.
or See my tag as a guide to place the elements as I have.
Add any other names and copy rite information that is required,
Save as you would normally.
Thats it tutorial complete. Use my finished result as a reference.
This tutorial was written by DigiMania Scraps
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc
Subscribe to:
Post Comments
(Atom)
Blinkie
0 comments:
Post a Comment