Showing posts with label SCRAPKITS. Show all posts
Showing posts with label SCRAPKITS. Show all posts
Attitude
** CT Show Off **
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
Supplies Needed
Tube/Image of choice –"Radio Tape Girl" - Arthur Crowe
You will need a license to use this tube
You can Purchase this tube at
Scrap Supplies
Scrapkit - Kinky Attitude - Dream Designs
available for purchase at
- Digi Divas Store -
Mask - WSLMASK_220 - WeeScottsLass
Font used - Next Custom & Pixelette (Credits)
-----------------------------------------
-Lets Get Started-
Open a new blank canvas
600x600
Floodfill white.
Paste a paper of choice from the scrapkit
I used paper 3
or you may use another of choice
I will assume you are using the same as I
however this tutorial will work with any other
You can also
flood fill with a colour from your tube.
Layers - Load/Save Mask - Load Mask from disk -
Load your mask of choice - or use as I have
Mask - load with the following settings
Source Luminance - Fit to canvas - Hide all mask checked.
Merge Group.
resize to suit.
Place in the centre of your canvas
Add a drop shadow to each layer.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Copy and paste your tube as a new layer
place as you wish or as I have,
See my finished Tag as a guide.
remembering to add drop shadow to each layer.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Add any elements that you may wish
I added element 5 from the supplies
duplicated this image - mirror and placed slightly off
again use my tag as a guide
and I also added a drop shadow to this layer.
You can select any other elements from the kit
and rotate and place as you wish.
I also used elements
55, 14, 20, 34, 35, 41 and 95
55, 14, 20, 34, 35, 41 and 95
Place as you wish are use my finished tag as a guide
Add any other names and copy rite information that is required,
Save as you would normally.
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
Dream Designs "Kinky Attitude" Preview
Tell Laura I Love Her
-- CT Tutorial --
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
Supplies Needed
Tube/Image of choice –"Laura" - Chris Pastel
You will need a license to use this tube
You can Purchase this tube at
Mask - WSLMASK_216 - WeeScottsLass
Font used - AL Serenade & Pixelette (Credits)
-----------------------------------------
Font used - AL Serenade & Pixelette (Credits)
-----------------------------------------
-Lets Get Started-
Open a new blank canvas
600x600
Floodfill white.
Paste a paper of choice from the scrapkit
I used paper 5. You can also
floodfill with a colour from your tube.
I chose a paper.
Layers - Load/Save Mask - Load Mask from disk -
Load your mask of choice - or use as i have
Mask - load with the following settings
Source Luminance - Fit to canvas - Hide all mask checked.
Merge Group.
Move to the bottom.
or another kit, or colour of choice.
I will assume you are using the same kit as I have.
I used paper 2
Selections - Invert - Hit delete on your keyboard.
not to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper to.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
600x600
Floodfill white.
Paste a paper of choice from the scrapkit
I used paper 5. You can also
floodfill with a colour from your tube.
I chose a paper.
Layers - Load/Save Mask - Load Mask from disk -
Load your mask of choice - or use as i have
Mask - load with the following settings
Source Luminance - Fit to canvas - Hide all mask checked.
Merge Group.
Move to the bottom.
Copy and paste Element fr1 as a new layer
resize to suit.
Rotate this 45 Degrees
With your magic wand
Select inside the frame
Selections - modify - Expand by 5
Copy and paste a paper of choice from the scrapkit.resize to suit.
Rotate this 45 Degrees
With your magic wand
Select inside the frame
Selections - modify - Expand by 5
or another kit, or colour of choice.
I will assume you are using the same kit as I have.
I used paper 2
Selections - Invert - Hit delete on your keyboard.
Move this paper layer below your frame layer.
You can also use the above steps just colour if you prefernot to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper to.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Copy and paste your tube as a new layer
place as you wish or as i have,
See my finished Tag as a guide.
remembering to add drop shadow to each layer.0 - 0 - 30 - 6.00 - Black.
Copy and paste your tube as a new layer
place as you wish or as i have,
See my finished Tag as a guide.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
0 - 0 - 30 - 6.00 - Black.
Add any elements that you may wish
I added the Element 8 from the kit
and added a drop shadow to this layer.
and placed to the bottom right of the frame.
You can select any other elements from the kit
and rotate and place as you wish.
I also used elements 12, 14 and 8
Place as you wish are use my finished tag as a guide
I added the Element 8 from the kit
and added a drop shadow to this layer.
and placed to the bottom right of the frame.
You can select any other elements from the kit
and rotate and place as you wish.
I also used elements 12, 14 and 8
Place as you wish are use my finished tag as a guide
Add any other names and copy rite information that is required,
Save as you would normally.
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
"Fairy Frolic Scrap kit Preview"
Show off
** Show Off **
I am so proud to show this gorgeous Tag off
Using one of my old PTU Scrapkits
That you can find for FREE
Over at
You can also Visit the
Bag A Snag Blog - Here
Bag A Snag Blog - Here
Thank you so much Gina
:)
Preview of my Dark Somnia Scrapkit
Is below
Gypsy Girl
** Tag/Tutorial Show Off **
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
- Supplies Needed -
Tube/Image of choice – Cally - Lys Isange
You will need a license to use this tube -
Tube availble at -
Pics For Design - Tiny Turtle -
Renders Art World - Inspirations Of Scrapfriends
Tube availble at -
Pics For Design - Tiny Turtle -
Renders Art World - Inspirations Of Scrapfriends
Scrapkit - PTU - Gypsy Girl
Hania Designs
Available to purchase at
Hania Designs
Available to purchase at
Font used – Steamwreck & Pixelette (Credits)
-----------------------------------------
- Lets Get Started -
Open a new canvas
600 x 600
Flood fill with white
Open Up a paper of choice
I used Paper 2
Paste as a new layer
Layers, new mask layer
Load/Save mask
Load mask from disk
use a mask of choice I used
Mask WSL_Mask56
Use the following settings on
your mask layer
Source Luminance,
Fit to cavas
Hide all mask,
Hit load.
Elements
Open Element 133
Rotate by 45 degrees
Re size by 60% Paste a new layer.
Copy and Paste Element 80
Place at the bottom right of your frame.
adjust resize to suit.once happy duplicate, image mirror.
Open Elements 45
place as you wish you may want to
Re size these layer by 50% Place as you wish
or see my tag as a guide for placement.I placed this element in the centre of the two books
Open Elements
71 and 87, Place element 71 in the middle of the two books.
Rotate by 45 degrees
Re size by 60% Paste a new layer.
Copy and Paste Element 80
Place at the bottom right of your frame.
adjust resize to suit.once happy duplicate, image mirror.
Open Elements 45
place as you wish you may want to
Re size these layer by 50% Place as you wish
or see my tag as a guide for placement.I placed this element in the centre of the two books
Open Elements
71 and 87, Place element 71 in the middle of the two books.
Resize element 87 by 35
duplicate this element, image then mirror
Once happy place either side of the crystal ball.
You can always refer to my finished tag
as a guide.
Copy and Paste your tube as a new layer
Place as you wish, Or as I have.I placed my tube above the frame layer
and deleted the base of the tube that i did not want showing.
Use my tag as a guide.
Delete any of the tube you do not wish to see on your tag.
duplicate this element, image then mirror
Once happy place either side of the crystal ball.
You can always refer to my finished tag
as a guide.
Copy and Paste your tube as a new layer
Place as you wish, Or as I have.I placed my tube above the frame layer
and deleted the base of the tube that i did not want showing.
Use my tag as a guide.
Delete any of the tube you do not wish to see on your tag.
Add a drop shadow of choice to each layer.
I used the following
I used the following
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Add any other elements that you may wish to use
Add any other elements that you may wish to use
to create the tag you want.
or See my tag as a guide to place the elements as I have.
or See my tag as a guide to place the elements as I have.
Add any other names and copyrite information that is required,
Save as you would normally.
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
Any resemblance to any other tutorial is purely coincidental.
ChouChou By The Beach Tutorial
** Tutorial/Tag Show Off **
I just can't get enough of this scrapkit
as you may tell
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
- Supplies Needed -
Tube/Image of choice – ChouChou - Lys Isange
You will need a license to use this tube -
Tube availble at -
Pics For Design - Tiny Turtle - Blog Of Lys Isange
Renders Art World - Inspirations Of Scrapfriends
Tube availble at -
Pics For Design - Tiny Turtle - Blog Of Lys Isange
Renders Art World - Inspirations Of Scrapfriends
Scrapkit - PTU - ChouChou By The Beach - MarieL Designs
available to purchase at the following stores
available to purchase at the following stores
Font used – Seaside Resort NF & Pixelette (Credits)
-----------------------------------------
- Lets Get Started -
Open a new canvas
600 x 600
Flood fill with white
Open Up a paper of choice
I used Paper 5
Paste as a new layer
Layers, new mask layer
Load/Save mask
Load mask from disk
use a mask of choice I used
Mask WSL_Mask47
Use the following settings on
your mask layer
Source Luminance,
Fit to cavas
Hide all mask,
Hit load.
Elements
Open Frame 5
Re size by 60% Paste a new layer.
Copy and Paste Element 36
Place at the top right of your frame.
adjust to suit.
Open Elements
place as you wish you may want to
duplicate this layer as I did,
Re size these layers by 50% Place as you wish
or see my tag as a guide for placement.
Open Elements
32, 34, 37, 42, 43 and 50,
Resize and place as you wish around your tag
You can always refer to my finished tag
as a guide.
Copy and Paste your tube as a new layer
Place as you wish, Or as I have.
Use my tag as a guide.
Delete any of the tube you do not wish to see on your tag.
Re size by 60% Paste a new layer.
Copy and Paste Element 36
Place at the top right of your frame.
adjust to suit.
Open Elements
place as you wish you may want to
duplicate this layer as I did,
Re size these layers by 50% Place as you wish
or see my tag as a guide for placement.
Open Elements
32, 34, 37, 42, 43 and 50,
Resize and place as you wish around your tag
You can always refer to my finished tag
as a guide.
Copy and Paste your tube as a new layer
Place as you wish, Or as I have.
Use my tag as a guide.
Delete any of the tube you do not wish to see on your tag.
Add a drop shadow of choice to each layer.
I used the following
I used the following
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Add any other elements that you may wish to use
Add any other elements that you may wish to use
to create the tag you want.
or See my tag as a guide to place the elements as I have.
or See my tag as a guide to place the elements as I have.
Add any other names and copy rite information that is required,
Save as you would normally.
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
Any resemblance to any other tutorial is purely coincidental.
50 Shades Steamier
** Tag Show Off **
Scrapkit used
- 50 Shades Steamier -
available to purchase at
Scrapkit created
by KCreations
Tag assembled by
DigiMania
Tube used in this tag
Is a FREE TO USE TUBE
Created by
- Pat at Country-Wood -
A license is NOT required to use these tubes
but Credit is always required.
but Credit is always required.
High School
** Tag Show Off **
Scrapkit used
- High School -
Created by
Mariel Designs
Available to purchase at
Tube Used in the above tag is
By Lys Isange
Available for purchase at
Tube used in the below tag is
by Lys Isange
Available to Purchase at
You will require a license to use this artwork
Both Tags assembled by
DigiMania2015
Below is a preview of the scrapkit
&
Links to stores for purchase
Fairy Dreams
** Tag Show off **
Scrapkit Used
Tantilizing Designz
- Fairy Dreams -
Available to purchase at
This is a PTU scrapkit
Assembled by DigiMania2015
The Fusionish
** Tag Show Off **
** CT TAG SHOW OFF **
The Fusionish
Scrapkit PTU Fusionish - Mellie Beans
Available to purchase
here
here
Tube used used in the 1st Image is that of Zindy S.D Nielson
This was purchased from MyPspTubes.
You require a license to use this tube from MPT
Tube used in the second tag is that of Zindy's FREE ART
Buzzy Bear
** Tag Show Off **
Tutorial to follow shortly
Scrapkit used
- Buzzy Bear -
available to purchase at
Scrapkit created
by Tantilizing Designz
Tag assembled by
DigiMania
Tube used in below tag
is that of Suzanne Woolcott
You are required a licence to use this tube
B.C.A Race For Life Scrapkit
** FREE TO USE **
As October is BCA month
Here is my Breast Cancer Awareness
Scrapkit
You can download this kit from
I would love to see any creations made from
using this kit or any of my others,
so I can showcase them on my blog/facebook/twitter etc
Please Abide by my Terms Of Use
PLEASE DO NOT SHARE
Direct them to this site to download
:)
Please email me
with any creations you make
Subscribe to:
Posts
(Atom)
Blinkie
