Showing posts with label Kandii Popz. Show all posts
Showing posts with label Kandii Popz. Show all posts
Black'd Emo
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
- Supplies Needed -
Tube/Image of choice – Ismael Rac - Ismael Rac
You will need a license to use this tube -
This is an Exclusive
Tube only availble at BagASnagForum
This is an Exclusive
Tube only availble at BagASnagForum
Scrapkit - PTU - Black'd Emo - Kandii Popz
Font used – Frosting for breakfast & Pixelette (Credits)
-----------------------------------------
- Lets Get Started -
Open a new canvas
600 x 600
Flood fill with white
Open up Wire 1 Element
Paste as a new layer
Lower the opacity to suit
I lowered to 56
Open Frame 1
Re size by 60% Paste a new layer.
Copy and Paste Banner 1
Place at the top of your frame.
Open Elements
Heart 3 - Flower 1 - Flower 2
Re size these layers by 50% Place as you wish
or see my tag as a guide for placement.
With Your Magic Wand
Select inside the center of your frame.
Selections - Modify - Expand by 5
Open a paper of choice i chose Paper 18
Paste as a new layer
Selections - Invert - Hit delete on keyboard.
Move this layer below your frame layer.
Copy and Paste your tube as a new layer
Place as you wish, Or as I have.
Use my tag as a guide.
Delete any of the tube you do not wish to see on your tag.
Open a new canvas
600 x 600
Flood fill with white
Open up Wire 1 Element
Paste as a new layer
Lower the opacity to suit
I lowered to 56
Open Frame 1
Re size by 60% Paste a new layer.
Copy and Paste Banner 1
Place at the top of your frame.
Open Elements
Heart 3 - Flower 1 - Flower 2
Re size these layers by 50% Place as you wish
or see my tag as a guide for placement.
With Your Magic Wand
Select inside the center of your frame.
Selections - Modify - Expand by 5
Open a paper of choice i chose Paper 18
Paste as a new layer
Selections - Invert - Hit delete on keyboard.
Move this layer below your frame layer.
Copy and Paste your tube as a new layer
Place as you wish, Or as I have.
Use my tag as a guide.
Delete any of the tube you do not wish to see on your tag.
Add a drop shadow of choice to each layer.
I used the following
I used the following
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Add any other elements that you may wish to use
Add any other elements that you may wish to use
to create the tag you want.
or See my tag as a guide to place the elements as I have.
or See my tag as a guide to place the elements as I have.
Add any other names and copy rite information that is required,
Save as you would normally.
That's it tutorial complete. Use my finished result as a reference.
This tutorial was written by DigiMania Scraps
That's it tutorial complete. Use my finished result as a reference.
This tutorial was written by DigiMania Scraps
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc
Attitude Princess
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
- Supplies Needed -
Tube/Image of choice – Lady mishka - PicsForDesign
You will need a license to use this tube
Scrapkit - PTU - Attitde Princess - Kandii Popz
Font used – Frosting for breakfast & Pixelette (Credits)
-----------------------------------------
- Lets Get Started -
Open a new canvas
600 x 600
Flood fill with white
Open up the circle frame from the kit.
Duplicate this layer.
move to the right slightly higher.
see my tag as a guide.
Once happy merge these two layers together.
Open up the wire element
move this below your frame layer.
duplicate - image mirror -
move around this element until you are happy.
merge these two layers together.
with your magic wand select inside the frame layer.
selections - modify - expand by 5
copy and paste a paper of choice as anew layer.
selections - invert - hit delete on your keyboard.
Move this layer below your frame layer.
Again select inside the frame layer with your magic wand
copy and paste your tube as a new layer and place as you wish
to be seen on your frame layer. use my tag as a guide.
with your eraser tool delete any of the tube you do not want to see.
Open a bow of choice. Re size to suit.
Place at the top of your frame.
again revert to my tag as a guide.
duplicate this for the other frame.
Open a new canvas
600 x 600
Flood fill with white
Open up the circle frame from the kit.
Duplicate this layer.
move to the right slightly higher.
see my tag as a guide.
Once happy merge these two layers together.
Open up the wire element
move this below your frame layer.
duplicate - image mirror -
move around this element until you are happy.
merge these two layers together.
with your magic wand select inside the frame layer.
selections - modify - expand by 5
copy and paste a paper of choice as anew layer.
selections - invert - hit delete on your keyboard.
Move this layer below your frame layer.
Again select inside the frame layer with your magic wand
copy and paste your tube as a new layer and place as you wish
to be seen on your frame layer. use my tag as a guide.
with your eraser tool delete any of the tube you do not want to see.
Open a bow of choice. Re size to suit.
Place at the top of your frame.
again revert to my tag as a guide.
duplicate this for the other frame.
Add a drop shadow of choice to each layer.
I used the following
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Add any other elements that you may wish to use
to create the tag you want.
or See my tag as a guide to place the elements as I have.
Add any other names and copy rite information that is required,
Save as you would normally.
Thats it tutorial complete. Use my finished result as a reference.
This tutorial was written by DigiMania Scraps
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc
Girlz Night Out
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
- Supplies Needed -
Tube of choice - Very Many - PicsForDesign
Scrapkit PTU- Girlz Night Out - Kandii Popz
Template - 97 - Addictive Templates
OPTIONAL FILTER - Xero - Radiance
Font used – Poplar STD & Pixelette (Credits)
-----------------------------------------
-----------------------------------------
-Lets Get Started-
Open the Template - close of credits
CTRL+D Close out original Template.
Select a section of the template.
Selections - Select all - Float - Defloat
Copy and paste a paper of choice from your desired scrapkit.
Selections - Invert - Hit delete on your keyboard.
Repeat this step for the remaining sections of the template
that you are wanting to fill.
You can also use the above steps just color if you prefer
not to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
CTRL+D Close out original Template.
Select a section of the template.
Selections - Select all - Float - Defloat
Copy and paste a paper of choice from your desired scrapkit.
Selections - Invert - Hit delete on your keyboard.
Repeat this step for the remaining sections of the template
that you are wanting to fill.
You can also use the above steps just color if you prefer
not to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Select the bottom left square
Selections - Float - Selections - De Float - Selections - Invert
0 - 0 - 30 - 6.00 - Black.
Select the bottom left square
Selections - Float - Selections - De Float - Selections - Invert
Place your tube as you wish to be shown
See my tag for guide.
Repeat this step for the right hand side square.
Once happy with placement of how you are wanting
your tube to be seen in the square.
Hit Delete on your keyboard.
On your tube layer load the following effect
Add any elements that you may wish to use.
Remembering to add the same previously used drop shadow
to each new layer that you add.
See my tag for guide.
Repeat this step for the right hand side square.
Once happy with placement of how you are wanting
your tube to be seen in the square.
Hit Delete on your keyboard.
- OPTIONAL FILTER -
On your tube layer load the following effect
Xero Radiance.
You don't have to add this effect.
Mess with the settings until you are happy.
or load with the following settings.
128 - 50 - 128 - 255 - OK.
Once again Copy and paste over your tube of choice
Place this on the right hand side of your template.
See my tag as a guide.
Add the previously used drop shadow.
Add any elements that you may wish to use.
Remembering to add the same previously used drop shadow
to each new layer that you add.
Add any other names and copy rite information that is required,
Save as you would normally.
That's it tutorial complete. Use my finished result as a reference.
This tutorial was written by DigiMania Scraps
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
Save as you would normally.
That's it tutorial complete. Use my finished result as a reference.
This tutorial was written by DigiMania Scraps
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
B*!#h With Attitude
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
- Supplies Needed -
Tube of choice - Very Many - PicsForDesign
Scrapkit PTU- Bitch With Attitude - Kandii Popz
Template - 188 - Addictive Templates
OPTIONAL FILTER - Xero - Radiance
Font used – Poplar STD & Pixelette (Credits)
-----------------------------------------
-----------------------------------------
-Lets Get Started-
Open the Template - close of credits
CTRL+D Close out original Template.
Select a section of the template.
Selections - Select all - Float - Defloat
Copy and paste a paper of choice from your desired scrapkit.
Selections - Invert - Hit delete on your keyboard.
Repeat this step for the remaining sections of the template
that you are wanting to fill.
You can also use the above steps just color if you prefer
not to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
CTRL+D Close out original Template.
Select a section of the template.
Selections - Select all - Float - Defloat
Copy and paste a paper of choice from your desired scrapkit.
Selections - Invert - Hit delete on your keyboard.
Repeat this step for the remaining sections of the template
that you are wanting to fill.
You can also use the above steps just color if you prefer
not to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Select the bottom left circle
Selections - Float - Selections - De Float - Selections - Invert
0 - 0 - 30 - 6.00 - Black.
Select the bottom left circle
Selections - Float - Selections - De Float - Selections - Invert
Place your tube as you wish to be shown
See my tag for guide.
Once happy with placement of how you are wanting
your tube to be seen in the circle.
Hit Delete on your keyboard.
On your tube layer load the following effect
Add any elements that you may wish to use.
Remembering to add the same previously used drop shadow
to each new layer that you add.
See my tag for guide.
Once happy with placement of how you are wanting
your tube to be seen in the circle.
Hit Delete on your keyboard.
OPTIONAL FILTER
On your tube layer load the following effect
Xero Radiance.
You don't have to add this effect.
Mess with the settings until you are happy.
or load with the following settings.
128 - 50 - 128 - 255 - OK.
Once again Copy and paste over your tube of choice
Place this on the right hand side of your template.
See my tag as a guide.
Add the previously used drop shadow.
Add any elements that you may wish to use.
Remembering to add the same previously used drop shadow
to each new layer that you add.
Add any other names and copy rite information that is required,
Save as you would normally.
That's it tutorial complete. Use my finished result as a reference.
This tutorial was written by DigiMania Scraps
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
Save as you would normally.
That's it tutorial complete. Use my finished result as a reference.
This tutorial was written by DigiMania Scraps
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
Sinfully Yours
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
- Supplies Needed -
Tube of choice - Very Many - PicsForDesign
Scrapkit PTU- On The Naughty List - Kandii Popz
Template - Sinfully Yours - Eye Candii Graphicz
OPTIONAL FILTER - Xero - Radiance
Font used – Poplar STD & Pixelette (Credits)
-----------------------------------------
-----------------------------------------
-Lets Get Started-
Open the Template - close of credits
CTRL+D Close out original Template.
Select a section of the template.
Selections - Select all - Float - Defloat
Copy and paste a paper of choice from your desired scrapkit.
Selections - Invert - Hit delete on your keyboard.
Repeat this step for the remaining sections of the template
that you are wanting to fill.
You can also use the above steps just color if you prefer
not to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper to.
I used Drop shadow with the following settings.
CTRL+D Close out original Template.
Select a section of the template.
Selections - Select all - Float - Defloat
Copy and paste a paper of choice from your desired scrapkit.
Selections - Invert - Hit delete on your keyboard.
Repeat this step for the remaining sections of the template
that you are wanting to fill.
You can also use the above steps just color if you prefer
not to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper to.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
OPTIONAL FILTER
On your tube layer load the following effect
Xero Radiance.
You don't have to add this effect.
Mess with the settings until you are happy.
or load with the following settings.
128 - 50 - 128 - 255 - OK.
0 - 0 - 30 - 6.00 - Black.
OPTIONAL FILTER
On your tube layer load the following effect
Xero Radiance.
You don't have to add this effect.
Mess with the settings until you are happy.
or load with the following settings.
128 - 50 - 128 - 255 - OK.
Place your tube as you wish to be shown
See my tag for guide.
Add any elements that you may wish to use.
Remembering to add the same previously used drop shadow
to each new layer that you add.
See my tag for guide.
Add any elements that you may wish to use.
Remembering to add the same previously used drop shadow
to each new layer that you add.
Add any other names and copy rite information that is required,
Save as you would normally.
That's it tutorial complete. Use my finished result as a reference.
This tutorial was written by DigiMania Scraps
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
Save as you would normally.
That's it tutorial complete. Use my finished result as a reference.
This tutorial was written by DigiMania Scraps
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
Naughty List
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
Supplies Needed
Tube/Image of choice – Elias Chatzoudis - EliasArtShop
FREE TO USE TUBE
Scrapkit PTU- On The Naughty List - Kandii Popz
Template - RockAttude - Eye Candii Graphicz
OPTIONAL FILTER - Xero - Radiance
Font used – Poplar STD (72) & Pixelette (Credits)
-----------------------------------------
-Lets Get Started-
Open the Template - close of credits
CTRL+D Close out original Template.
Select a section of the template.
Selections - Select all - Float - Defloat
Copy and paste a paper of choice from your desired scrapkit.
Selections - Invert - Hit delete on your keyboard.
Repeat this step for the remaining sections of the template
that you are wanting to fill.
You can also use the above steps just color if you prefer
not to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper to.
I used Drop shadow with the following settings.
CTRL+D Close out original Template.
Select a section of the template.
Selections - Select all - Float - Defloat
Copy and paste a paper of choice from your desired scrapkit.
Selections - Invert - Hit delete on your keyboard.
Repeat this step for the remaining sections of the template
that you are wanting to fill.
You can also use the above steps just color if you prefer
not to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper to.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Select the inner of one of the circles.
Selections, Select all, Float , defloat
Selections - Invert - Hit Delete on your keyboard
OPTIONAL FILTER
On your tube layer load the following effect
Xero Radiance.
You don't have to add this effect.
Mess with the settings until you are happy.
or load with the following settings.
128 - 50 - 128 - 255 - OK.
0 - 0 - 30 - 6.00 - Black.
Select the inner of one of the circles.
Selections, Select all, Float , defloat
Copy and paste your tube as a new layer
place as you wish or as i have,
See my finished Tag as a guide.
Once happy with placementplace as you wish or as i have,
See my finished Tag as a guide.
Selections - Invert - Hit Delete on your keyboard
OPTIONAL FILTER
On your tube layer load the following effect
Xero Radiance.
You don't have to add this effect.
Mess with the settings until you are happy.
or load with the following settings.
128 - 50 - 128 - 255 - OK.
Over on your layers palette
change the blend mode to - Screen
again this is optional. you can mess with any of the
blend modes until you find one that suits.
Repeat this strep for the opposite circle layer.
change the blend mode to - Screen
again this is optional. you can mess with any of the
blend modes until you find one that suits.
Repeat this strep for the opposite circle layer.
Select the oval layer in the center of your canvas.
Selections - Select all - Selections - Float - Selections - De Float
Once again copy and paste your tube as a new layer
Place your tube as you wish to be shown
Once happy
Selections - Invert - Hit Delete on your keyboard
Add any elements that you may wish to use.
Remembering to add the same previously used drop shadow
to each new layer that you add.
Selections - Select all - Selections - Float - Selections - De Float
Once again copy and paste your tube as a new layer
Place your tube as you wish to be shown
Once happy
Selections - Invert - Hit Delete on your keyboard
Add any elements that you may wish to use.
Remembering to add the same previously used drop shadow
to each new layer that you add.
Add any other names and copy rite information that is required,
Save as you would normally.
That's it tutorial complete. Use my finished result as a reference.
This tutorial was written by DigiMania Scraps
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
Subscribe to:
Posts
(Atom)
Blinkie
