Showing posts with label Selisan Al-Gaib. Show all posts
Showing posts with label Selisan Al-Gaib. Show all posts
RockStar
** CT Show Off **
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
Supplies Needed
Tube/Image of choice –"Nicky" - Selisan Al Gaib
You will need a license to use this tube
You can Purchase this tube at
Scrap Supplies
FTU Scrapkit - Rock Star - Kittz Kreationz
available for download at
- Kittz Kreationz -
Mask - WSLMASK_219 - WeeScottsLass
Font used - Imprint MT Shadow & Pixelette (Credits)
-----------------------------------------
-Lets Get Started-
Open a new blank canvas
600x600
Floodfill white.
Paste a paper of choice from the scrapkit
I used paper 2
or you may use another of choice
I will assume you are using the same as I
however this tutorial will work with any other
You can also
flood fill with a colour from your tube as I did.
Layers - Load/Save Mask - Load Mask from disk -
Load your mask of choice - or use as I have
Mask - load with the following settings
Source Luminance - Fit to canvas - Hide all mask checked.
Merge Group.
resize to suit.
Place in the centre of your canvas
Add a drop shadow to this layer.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Copy and paste your tube as a new layer
place as you wish or as I have,
See my finished Tag as a guide.
remembering to add drop shadow to each layer.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Add any elements that you may wish
I added element 21 & 29 from the supplies
again use my tag as a guide
and I also added a drop shadow to these layers.
You can select any other elements from the kit
and rotate and place as you wish.
I also used elements
39 & 54
39 & 54
Place as you wish are use my finished tag as a guide
Add any other names and copy rite information that is required,
Save as you would normally.
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
Isboe
** CT Tutorial **
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
Supplies Needed
Tube/Image of choice –"Isboe" - Selisan Al-Gaib
You will need a license to use this tube
You can Purchase this tube at
Mask - WSLMASK_35 - WeeScottsLass
Font used - AL Serenade & Pixelette (Credits)
-----------------------------------------
-Lets Get Started-
Open a new blank canvas
600x600
Floodfill white.
Paste a paper of choice from the scrap kit
I used paper 9
I used paper 9
You can also
flood fill with a colour from your tube.
I chose a paper.
Layers - Load/Save Mask - Load Mask from disk -
Load your mask of choice - or use as I have
Mask - load with the following settings
Source Luminance - Fit to canvas - Hide all mask checked.
Merge Group.
Move to the bottom.
Copy and paste element 13 as a new layer
resize to suit.
Add a drop shadow to each layer
that you colour/Paste paper to.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Copy and paste your tube as a new layer
place as you wish or as i have,
See my finished Tag as a guide.
remembering to add drop shadow to each layer.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Add any elements that you may wish
I added element 2 from the kit
and added a drop shadow to this layer.
and placed to the bottom right of the frame.
You can select any other elements from the kit
and rotate and place as you wish.
I also used elements
12, 14, 19, 20, 26 and 40
12, 14, 19, 20, 26 and 40
Place as you wish are use my finished tag as a guide
Add any other names and copy rite information that is required,
Save as you would normally.
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
"Fusionish Scrap kit Preview"
Aurora
** CT TUTORIAL **
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
Supplies Needed
Tube/Image of choice –"Nouquie" - Selisan Al Gaib
You will need a license to use this tube
You can Purchase this tube at
Mask - WSLMASK_223 - WeeScottsLass
Font used - AR BONNIE & Pixelette (Credits)
-----------------------------------------
-Lets Get Started-
Open a new blank canvas
600x600
Floodfill white.
Paste a paper of choice from the scrap kit
I used paper 1. You can also
flood fill with a colour from your tube.
I chose a paper.
Layers - Load/Save Mask - Load Mask from disk -
Load your mask of choice - or use as i have
Mask - load with the following settings
Source Luminance - Fit to canvas - Hide all mask checked.
Merge Group.
Move to the bottom.
Copy and paste Frame 2 as a new layer
resize to suit.
With your magic wand
Select inside the frame
Selections - modify - Expand by 5
Copy and paste a paper of choice from the scrap kit.
or another kit, or colour of choice.
I will assume you are using the same kit as I have.
Selections - Invert - Hit delete on your keyboard.
Move this paper layer below your frame layer.
You can also use the above steps just colour if you prefer
not to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper to.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Copy and paste your tube as a new layer
place as you wish or as i have,
See my finished Tag as a guide.
remembering to add drop shadow to each layer.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Add any elements that you may wish
I added the Flower 4 from the kit
and added a drop shadow to this layer.
and placed to the bottom right of the frame.
You can select any other elements from the kit
and rotate and place as you wish.
I also used elements Flower 5, Clock, Branch 1,
Bow 2, Eiffel Tower and branch 2.
Place as you wish are use my finished tag as a guide
Add any other names and copy rite information that is required,
Save as you would normally.
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
"Aurora Scrap kit Preview"
Devia
** CT Tutorial **
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
Supplies Needed
Tube/Image of choice –"Devia" - Selisan Al Gaib
You will need a license to use this tube
You can Purchase this tube at
Mask - WSLMASK_216 - WeeScottsLass
Font used - AR JULIAN & Pixelette (Credits)
-----------------------------------------
-Lets Get Started-
Open a new blank canvas
600x600
Floodfill white.
Paste a paper of choice from the scrapkit
I used paper 19. You can also
floodfill with a colour from your tube.
I chose a paper.
Layers - Load/Save Mask - Load Mask from disk -
Load your mask of choice - or use as i have
Mask - load with the following settings
Source Luminance - Fit to canvas - Hide all mask checked.
Merge Group. Move to the bottom.
Copy and paste element 30 as a new layer
resize to suit.
With your magic wand
Select inside the frame
Selections - modify - Expand by 5
resize to suit.
With your magic wand
Select inside the frame
Selections - modify - Expand by 5
Copy and paste a paper of choice from the scrapkit.
or another kit, or colour of choice.
I will assume you are using the same kit as I have.
I used paper 16
Selections - Invert - Hit delete on your keyboard.
Move this paper layer below your frame layer.
You can also use the above steps just colour if you prefer
not to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper to.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Copy and paste your tube as a new layer
place as you wish or as i have,
See my finished Tag as a guide.
remembering to add drop shadow to each layer.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
0 - 0 - 30 - 6.00 - Black.
Add any elements that you may wish
I added Element 9 from the kit
Duplicated this layer
Image - Mirror
and added a drop shadow to this layer.
and placed to the bottom right of the frame.
You can select any other elements from the kit
and rotate and place as you wish.
I also used elements 26, 84, 86.
Place as you wish or use my finished tag as a guide
I added Element 9 from the kit
Duplicated this layer
Image - Mirror
and added a drop shadow to this layer.
and placed to the bottom right of the frame.
You can select any other elements from the kit
and rotate and place as you wish.
I also used elements 26, 84, 86.
Place as you wish or use my finished tag as a guide
Add any other names and copy rite information that is required,
Save as you would normally.
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
"Belladonna Scrap kit Preview"
Breast Cancer Awareness 15'
-- CT Tutorial --
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
Supplies Needed
Tube/Image of choice –"Trilio" - Selisan Al-Gaib
You will need a license to use this tube
You can Purchase this tube at
Scrpkit used FTU - "Breast Cance Awareness" - TopCat
Mask - WSLMASK_220 - WeeScottsLass
Font used – A&S Christmas Script & Pixelette (Credits)
-----------------------------------------
Font used – A&S Christmas Script & Pixelette (Credits)
-----------------------------------------
-Lets Get Started-
Open a new blank canvas
Floodfill white.
Paste a paper of choice from the scrapkit
I used paper 21
you can also
floodfill with a colour from your tube.
I chose a paper.
Layers - Load/Save Mask - Load Mask from disk -
Load your mask of choice - or use as i have
Mask - load with the following settings
Source Luminance - Fit to canvas - Hide all mask checked.
Merge Group.
Move to the bottom.
or another kit, or colour of choice.
I will assume you are using the same kit as I have.
I used paper 19
Selections - Invert - Hit delete on your keyboard.
not to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper to.
I used Drop shadow with the following settings.
remembering to add drop shadow to each layer.
Effects - 3D Effects - Drop shadow
Floodfill white.
Paste a paper of choice from the scrapkit
I used paper 21
you can also
floodfill with a colour from your tube.
I chose a paper.
Layers - Load/Save Mask - Load Mask from disk -
Load your mask of choice - or use as i have
Mask - load with the following settings
Source Luminance - Fit to canvas - Hide all mask checked.
Merge Group.
Move to the bottom.
Copy and paste element 34
Image - rotate - 90
Image rotate - 20
With your magic wand
select inside the inner of the frame layer.
Selections - Modify - Selections - Expand by 5
Copy and paste a paper of choice from Supplies provided.or another kit, or colour of choice.
I will assume you are using the same kit as I have.
I used paper 19
Selections - Invert - Hit delete on your keyboard.
Move this paper layer below your frame layer.
You can also use the above steps just color if you prefernot to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper to.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Copy and paste your tube as a new layer
place as you wish or as i have,
See my finished Tag as a guide.
You will need to rotate the same way as you did your frame.
also add any other embelishments that you may desire.0 - 0 - 30 - 6.00 - Black.
Copy and paste your tube as a new layer
place as you wish or as i have,
See my finished Tag as a guide.
You will need to rotate the same way as you did your frame.
remembering to add drop shadow to each layer.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Select the template inner photo frame
selections - select all - float - defloat
copy and paste your tube of choice.
placing the part of the tube that you want shown.
selections - invert - Hit delete on your keyboard.
0 - 0 - 30 - 6.00 - Black.
Select the template inner photo frame
selections - select all - float - defloat
copy and paste your tube of choice.
placing the part of the tube that you want shown.
selections - invert - Hit delete on your keyboard.
Add any elements that you may wish
i added the Element 46 from the kit
and added a drop shadow to this layer.
You can select any elements from the kit
and rotate and place as you wish.
Add any other names and copy rite information that is required,
Save as you would normally.
Thats it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania Scraps
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
Subscribe to:
Posts
(Atom)
Blinkie
