Flirty
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
Supplies Needed
Tube/Image of choice – Nicholas Garton - UpYourArt
You will need a license to use this tube
Font used – Emmett & Pixelette (Credits)
-----------------------------------------
-Lets Get Started-
Open the Template - close of credits
CTRL+D Close out original Template.
Layers - New raster layer - Floodfill with a colour
either from tube or from scrapkit,
I chose from tube.
Layers - Load/Save Mask - Load Mask from disk -
Load your mask of choice - or use as i have
Mask - 224Millies load with the following settings
Source Luminance - Fit to canvas - Hide all mask checked.
Merge Group. Move to the bottom.
Select a section of the template.
Selections - Select all - Float - Defloat
Copy and paste a paper of choice from your desired scrapkit.
Selections - Invert - Hit delete on your keyboard.
Repeat this step for the remaining sections of the template
that you are wanting to fill.
You can also use the above steps just color if you prefer
not to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper to.
I used Drop shadow with the following settings.
remembering to add drop shadow to each layer.
Effects - 3D Effects - Drop shadow
CTRL+D Close out original Template.
Layers - New raster layer - Floodfill with a colour
either from tube or from scrapkit,
I chose from tube.
Layers - Load/Save Mask - Load Mask from disk -
Load your mask of choice - or use as i have
Mask - 224Millies load with the following settings
Source Luminance - Fit to canvas - Hide all mask checked.
Merge Group. Move to the bottom.
Select a section of the template.
Selections - Select all - Float - Defloat
Copy and paste a paper of choice from your desired scrapkit.
Selections - Invert - Hit delete on your keyboard.
Repeat this step for the remaining sections of the template
that you are wanting to fill.
You can also use the above steps just color if you prefer
not to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper to.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Copy and paste your tube as a new layer
place as you wish or as i have,
See my finished Tag as a guide.
also add any other embelishments that you may desire.0 - 0 - 30 - 6.00 - Black.
Copy and paste your tube as a new layer
place as you wish or as i have,
See my finished Tag as a guide.
remembering to add drop shadow to each layer.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Select the template inner photo frame
called frame back - selections - select all - float - defloat
copy and paste your tube of choice.
placing the part of the tube that you want shown.
i used the head.
selections - invert - Hit delete on your keyboard.
0 - 0 - 30 - 6.00 - Black.
Select the template inner photo frame
called frame back - selections - select all - float - defloat
copy and paste your tube of choice.
placing the part of the tube that you want shown.
i used the head.
selections - invert - Hit delete on your keyboard.
- FILTER -
On your tube layer load the following effect
Xero Radiance.
You don't have to add this effect.
Mess with the settings until you are happy.
or load with the following settings.
128 - 50 - 128 - 255 - OK.
Add any other names and copy rite information that is required,
Save as you would normally.
Thats it tutorial complete. Use my finished result as a reference.
This tutorial was written by DigiMania Scraps
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
Xero Radiance.
You don't have to add this effect.
Mess with the settings until you are happy.
or load with the following settings.
128 - 50 - 128 - 255 - OK.
Add any other names and copy rite information that is required,
Save as you would normally.
Thats it tutorial complete. Use my finished result as a reference.
This tutorial was written by DigiMania Scraps
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
Subscribe to:
Post Comments
(Atom)
Blinkie
0 comments:
Post a Comment